29-Inch

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - Compound: T7 for balanced speed and rolling efficiency. - Tubeless Ready. - GRID Trail 27.5x2.4' T7, psi 25-50, approximate weight 915g. - GRID Trail 29x2.4' T7, psi 25-50, approximate weight 980g.

This Hillbilly MTB tire likes it raw. Gravity-focused, excelling in steep, slippery, loose, and wet conditions in the continental north, the all-new Hillbilly is designed specifically to find traction in shifty natural terrain and bring confidence and control to the unpredictable wild. The new mountain bike tire tread pattern features an aggressive tread with deep center knobs and high-volume shoulder blocks to bite through loose soil when cornering. Block-in-block transition knobs reinforce the tire structure, aid traction, and lower rolling resistance, from plowing deep loam to railing rock slabs and charging over slippery roots. Specialized's exclusive Sticky Fast T9 rubber compound elevates the Hillbilly's traction, enabling it to stick everywhere, even in the greasiest conditions. In addition to its ability to grip in slippery situations, our T9 compound is formulated to bring just the right amount of damping to the backwoods party, reducing tire bounce and deflection to enhance stability and control in challenging conditions. This tubeless-ready trail tire is available in either GRID Trail or GRID Gravity casing, covering trail, all-mountain, enduro, and downhill. GRID Trail's bead-to-bead protection and stability make it an excellent choice for aggressive riding in rough conditions. GRID Gravity is a burly, two-ply construction designed for durability and puncture protection in extreme conditions, offering incredible strength and exceptional tire stability when loaded hard into corners and compressed into jump faces. Just add sealant as the Hillbilly is a 2Bliss ready clincher for easy mounting and inflation with or without tubes. - Large block-in-block shoulder knobs for supported cornering. - Spike center knobs to dig in and find traction over loose terrain. - High-damping GRIPTON T9 compound reduces terrain-induced chatter, rebounds slowly, and has extreme grip in all conditions. - GRID Gravity 2-ply casing construction is ideal for Enduro, Park, and Downhill riding. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures. - GRID Gravity 27.5x2.4; psi 25-50, approximate weight 1240g. - GRID Gravity 29x2.4; psi 25-50, approximate weight 1340g.

This Hillbilly MTB tire likes it raw. Gravity-focused, excelling in steep, slippery, loose, and wet conditions in the continental north, the all-new Hillbilly is designed specifically to find traction in shifty natural terrain and bring confidence and control to the unpredictable wild. The new mountain bike tire tread pattern features an aggressive tread with deep center knobs and high-volume shoulder blocks to bite through loose soil when cornering. Block-in-block transition knobs reinforce the tire structure, aid traction, and lower rolling resistance, from plowing deep loam to railing rock slabs and charging over slippery roots. Specialized’s exclusive Sticky Fast T9 rubber compound elevates the Hillbilly’s traction, enabling it to stick everywhere, even in the greasiest conditions. In addition to its ability to grip in slippery situations, our T9 compound is formulated to bring just the right amount of damping to the backwoods party, reducing tire bounce and deflection to enhance stability and control in challenging conditions. This tubeless-ready trail tire is available in either GRID Trail or GRID Gravity casing, covering trail, all-mountain, enduro, and downhill. GRID Trail’s bead-to-bead protection and stability make it an excellent choice for aggressive riding in rough conditions. GRID Gravity is a burly, two-ply construction designed for durability and puncture protection in extreme conditions, offering incredible strength and exceptional tire stability when loaded hard into corners and compressed into jump faces. Just add sealant as the Hillbilly is a 2Bliss ready clincher for easy mounting and inflation with or without tubes. - Large block-in-block shoulder knobs for supported cornering. - Spike center knobs to dig in and find traction over loose terrain. - High-damping GRIPTON T9 compound reduces terrain-induced chatter, rebounds slowly, and has extreme grip in all conditions. - GRID Trail Casing: 60 TPI, tough MTB trail construction with additional bead-to-bead protection for exceptional puncture resistance, sidewall stiffness, and stability. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures. - GRID Trail 27.5x2.4; psi 25-50, approximate weight 985g. - GRID Trail 29x2.4; psi 25-50, approximate weight 1070g.

The world’s fastest riders are always hungry for more traction. So when Loïc Bruni, Finn Iles, and Chris Grice from the Gravity team reached out to us to develop a mountain bike tire to tame World Cup Downhill tracks, we cooked up something that will satisfy even the most aggressive appetites. We completely redesigned the Cannibal tread pattern, integrating our super-sticky GRIPTON T9 compound with a high-volume casing that brings superior control to any terrain. Staggered shoulder blocks maximize cornering stability, and large center braking blocks bite aggressively into the ground. Engineered to the design specifications of our riders, the Cannibal balances weight and durability with GRID Gravity casing for Enduro, Downhill, and Park riding. The Cannibal delivers the unbeatable combination of grip, confidence, and control to devour any track. - High-volume casing and staggered shoulder blocks for predictable high-speed cornering. - Re-designed center knobs and siping form strong surface connections. - Wide braking edges and massive center blocks cut in for maximum deceleration. - GRIPTON T9 compound reduces terrain-induced chatter, enhancing confidence at warp speeds. - Compliant and adaptable GRID GRAVITY 2-ply casing construction is ideal for Enduro, Park, and Downhill riding. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures.

Mountain bike tires: there's a new boss in town. Serfas' 29-inch Sheriff tire is made from a long-wearing rubber compound and features a great small-knob tread pattern to give you traction on paths, trails and city streets.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

The Rekon is a light duty trail tire designed to go fast in technical terrain.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The Maxxis Forekaster features a spiky, well-spaced tread pattern that is ideal for XC racing or light duty trail riding in loose or wet conditions during the spring and fall. Use as a front paired with an Aspen or Ikon rear for an “aggressive” XC setup.

The second generation of the legendary High Roller - Easily clears debris - Open tread design - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims An open and aggressive tread design gives the High Roller II excellent soil penetration and mud-clearing ability. A square profile provides a solid, consistent feel across the knobs. Modified knobs on the shoulder and center improve braking performance and traction on hard surfaces. An excellent choice for technical, loose terrain.

With a tread design that deftly balances rolling speed with braking and cornering traction, it's hard to find fault with the Minion DHF. That's probably why it's one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there's a Minion DHF spec to meet your needs. The Minion DHF is available in trail, enduro, and downhill specs. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

The Maxxis Aspen is one of our premier XC race tires. A low center tread height allows the Aspen to roll quickly but substantial – for XC – side knobs provide cornering traction.

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

The legendary High Roller returns with an all-new hybrid tread design, but the same old winning ways! Developed with extensive input and testing from Maxxis' World Cup athletes, the third generation of the High Roller is built to take on mixed conditions at high speeds - The third gen High Roller slots into the Maxxis gravity range between the Assegai and the Shorty - Widely-spaced tread clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - Built to take on mixed conditions at high speeds - Center tread uses a mid-spike design similar to the Shorty but with a lower knob height - Knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces - Cornering traction is enhanced via large, well-supported side knobs for predictable handling - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - All Maxxis tires 2.40" and up are considered WT according to Maxxis whether or not they are labeled WT - 3C MaxxGrip: the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications - DD: Designed for Enduro racing and ebike use. Two layers of lightweight 120 TPI casing material are combined with a butyl sidewall insert to create a highly durable tire with more trail feedback than a Downhill casing tire - TR: Tubeless Ready means the ability to run lower pressures, improving traction, lowering rolling resistance, and less chance of flatting - Recommended installation: Front or rear - Tire Diameter: 29" - ISO Diameter: 622 / Mountain / 29er - Labeled Size: 29 x 2.4" - Casing: 60tpi - Max Pressure: 50psi - Bead: folding - Weight: 1,299g. (29 x 2.4")

Stare down rough terrain with this burly yet sleek tire. The Utility Player offers comfortable off-road exploration with modern, openly spaced treads and wide 2.25-inch casing. A broad spectrum of diameters gives you choice for fit. You still standing there? - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

From Rural to Urban eRuban Plus is the energy-saving SUV all-rounder that gets you to both Rural and Urban. It's your partner for your commute, running errands, and the weekend tour. PureGrip Compound—The advanced new compound Based on activated silica compounds, this technology was originally intended as a performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self-explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. While providing great grip, it is also long-lasting and highly durable—both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). PolyX Breaker—Puncture-defense With our PolyX Breaker, we bring our car expertise to the bicycle tire segment: Polyester has been used successfully for years in car tires and been tried and tested many times. The extremely resistant polyester fiber is woven tightly crosswise. In this way, a very high fabric density is reached which not only makes the Breaker more resistant to foreign objects but is also especially resistant to punctures. The rolling resistance is also not negatively affected by the PolyX Breaker. Plus Breaker—Maximum safety Between the tread and the carcass, a puncture protection of highly elastic special rubber is used. This practically impenetrable puncture protection successfully defies all types of foreign objects from getting to the inner tube below. Even a drawing pin cannot get through. Tires with Plus Breaker can be seen in almost every segment nowadays: Whether racing cycles, MTB, or city/trekking, the Plus Breaker guarantees maximum safety without negatively affecting the cycle properties of the tire. The consistency of the breaker has been adjusted so that the tire does not feel spongy when cornering. The Plus Breaker is true puncture protection. Please read the air pressure instructions! E50—Suitable for E-Bikes For our E-Bike tire, we relied on over 100 years of experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high-quality structure, puncture protection is high and the rolling resistance is low, offering protection from premature wear brought about by the additional driving force.