Accessories/Parts

Clip for 1A Raingutter tower. Includes one clip, one rivet and one cap nut. - Weight: 0.34 lbs.

Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.

Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Rear wheel strap for Boa bike mount. Includes one strap.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Pair of EndCaps for Yakima CoreBar.

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in

Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.

The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up. - Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four. - Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only. - Weight: 0.42 lbs - Dimensions: L 1.75in x W 1.50in x H 1.00in - No Assembly Required

There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.

This low-profile custom-install solution delivers up to a 220-lb. load capacity. It's a great choice for most any naked roof vehicle with a roof ditch. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts, including a roof top tent. Product Details: - Permanent installation into the roof ditch for up to a 220-lb. load rating. - Designed for use with our SkyLine towers paired with any Yakima crossbar. - Yakima's patented Landing Pad design for quick and easy tower installation and removal. - Includes snap-on covers for when the rack is removed. - Choice of two pad shapes lets you create the perfect fit. - Stainless steel rivets for superior strength. - Includes four Landing Pads and necessary hardware (see instructions for required list of tools) - Vehicle must have compatible roof ditch for proper instillation (see instructions for fit parameters) - Some assembly required,10 minute install Product Specs: - Weight: 2.57 lbs - Dimensions: L 7.00in x W 2.00in x H 1.50in

Product details: - Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes - Allows most RoundBar style mounts to attach in minutes - Tool free installation - Sold as a set of 4 - Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase

Yakima's Rattler Wheel Straps are replacement wheel straps. They install to your tray easily and have a ratcheting closure for security.

Take sleek to a new level – the ingenious RidgeLine Towers integrate with flush-mount factory side rails so you can build a real rack that carries more. Strong and versatile, they attach easily and have a sleek design that aligns with your vehicle’s aerodynamic attitude. - Attaches a base rack system to vehicles with flush-mount factory side rails. RidgeClips and crossbars required for a complete system. - Both are sold separately. Use Fit My Vehicle to find the clips and crossbars. - Advanced design is strong and quiet and aligns with aerodynamic vehicle aesthetics - Works with JetStream, CoreBar and RoundBar crossbars - Unique clip design adapts to your rails for a secure, accurate fit - BarBed has 12° of pitch adjustment to optimize tower position and level bars - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Weight: 1.25 lbs - Dimensions: L 5.00” x W 5.25” x H 3.50”

With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers. - Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four. - Includes 4 RoundBar end caps Product Specs: - Weight: 0.42 lbs. - Dimensions: L 2.00 in x W 2.00 in x H 1.00 in - Limited Lifetime Warranty

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key

Yakima's Side Loader Brackets are permanently side-mounted brackets that fit in the space between the top of your truck and the side window. They allow Yakima 1A Raingutter Towers to be used in some situations where no rain gutters exist (towers sold separately).

Includes a single SKS key.

SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.

Two plus two equals more: More bikes, more adventure, and more fun. Adding on the StageTwo +2 lets you double your capacity to four bikes, each carried securely and in style. The stadium seating architecture increases ground clearance on rutted trails or steep driveways and its offset tray design further minimizes bike to bike interference and maximizes functionality. The forward-facing remote tilt lever means fast access to the trunk area and integrated locking cables combine with your own lock to provide serious security. - Attaches to the 2” StageTwo to carry two additional bikes?Tiered and adjustable bike trays minimize bike to bike interference and maximize ground clearance - StrongArm™ hook secures bike at wheels, protecting painted surfaces and carbon frames - Convenient remote tilt lever for easy rear of car access - Offset Trays for extra bike to bike clearance - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, BMX, kids’ bikes, & E-bikes up to 60 lbs. each - Fits 16” to 29” wheel sizes and tires up to 3.25” wide and up to 5" wide with the StageTwo Fat Bike Kit (Sold Separately) - Accommodates bike wheelbases up to 52” - Integrated SKS (Same Key System) locks included for added bike security - Add your own bike lock to the integrated lock loop for greater bike security - Compatible only with 2" version of StageTwo - Available in two colorways, Anthracite and Vapor

Long gone are the days when your vehicle's spare tire gets in the way of an epic bike trip. This handy little extension adds 7.25 inches to a 2-inch hitch receiver, giving you the clearance to attach just about any 2-inch bike rack. We're looking at you Broncos, Wranglers, and G-wagons. - Extends your 2" hitch receiver by 7 1/4" - Secures to any 2" hitch receiver using a threaded pin - Heavy-duty steel construction - Provides clearance to most spare tires; please measure your spare tire before hand - Compatible with the following Yakima Hitch Racks: Dr. Tray, OnRamp, HoldUp EVO, HoldUp, TwoTimer, HangOver 4, FullSwing, LongHaul, RoadTrip, EXO System Product Specs: - Weight: 8.63 lbs. - Dimensions: L 12.75 in x W 3.00 in x H 3.00 in - Limited Lifetime Warranty

Yakima Tracks offer easy connectivity, and a low profile when towers are removed. Combine Yakima Tracks with Control Towers plus a set of Landing Pads and you have a versatile, adjustable base for your rooftop rack system. - Compatible with either SkyLine Towers or Control Towers and Landing Pad 1 - CapNut hardware included to install your rooftop rack system directly to fiberglass - For custom fit info, contact your local Yakima dealer or give us a call Product Specs: - Dimensions: L 54.00/68.00 in x W 1.62 in x H 0.50 in - Limited Lifetime Warranty

Yakima Tracks offer easy connectivity and a low profile when towers are removed. Combine Yakima Tracks with Control Towers plus a set of Landing Pads and you have a versatile, adjustable base for your rooftop car rack system. - Compatible with either SkyLine Towers or Control Towers and Landing Pad 1 - PlusNut hardware included to install your rooftop car rack system directly to a vehicle roof - PlusNuts for installation on sheet metal - For custom fit info, contact your local Yakima dealer or give us a call - Limited Lifetime Warranty

Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.

Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts. This Item may be in stock with Black accents or with Red, but both use the same part numbers. Please contact us to confirm the color of product in stock.

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.