Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Seatposts
$199.99 - $234.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel
$250.00
The Terra seatpost is the best choice for riding mixed terrain, gravel, or rough roads because it smooths the ride by allowing significant vertical compliance. The secret to this ride smoothing post is in the composite layup that we utilized. By utilizing composites with varying elongation characteristics at specific locations in the post, we enabled vertical compliance for comfort while retaining requisite strength for mixed terrain riding, all at a sub-200 gram weight (27.2 x 330 x 0).
- 18mm Vertical Compliance (20mm offset / Full Extension)
- 194 grams (27.2 x 330mm x 0)
- Advanced composite construction delivers ride-smoothing vertical compliance.
- Available in four sizes: 27.2mm x 330mm x 0 offset, 27.2mm x 380mm x 0 offset, 27.2mm x 330mm x 20mm offset, 27.2mm x 380mm x 20mm offset
- No-Fault crash replacement policy. Lifetime warranty
- Proven clamp design ensures ease of adjustment and slip-free performance.
- System Weight Limit: 275lbs / 125kg
$861.00
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components.
- Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch.
- Clean, simple and fast to install. No hoses to route, no fishing required.
- Updated internals for faster return speed in all conditions.
- New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost.
- SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components.
- Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.
$234.99
Such Great Heights
The budget-friendly Aeffect R Dropper Post is a rock-solid, shred-ready entry into the dropper post world. Designed right to keep you on the trails and out of the shop as much as possible, you'll wonder how you ever rode without one.
It's What's Inside That Counts
The brains of this dropper post are an extremely reliable cable-actuated hydraulic cartridge that delivers infinite adjustment within its travel.
Simple Saddle Setup
A user-friendly zero-offset seatpost clamp really cuts down on the time between setting up your saddle and ripping down the trail.
$179.00
$199.00
10% Off
The Cascade dropper post pays homage to the Cascade mountain range, home to some of the best riding in the PNW. This post is a workhorse: it’s super reliable, loved by our customers, and now features multiple travel options. The Cascade provides dependable up and down service for the miles to come, and maintenance on the Cascade is easy (like all our droppers). Plus, external routing at the mid-cap ensures your cables are kept nice and tidy during up and down actuation.
You can find sweet upgrades to the Cascade’s OG dropper design on the posts featuring 150/170mm of travel. These models have larger diameter stanchions, making them stiffer and lighter… which is sweet because who wants a bike part that’s heavy and too compliant? These longer travel models also come with an added DU bushing to combat seat wobble, because let's face it… the only thing that should be wobbly on your bike are your legs after a long ride.
Levers:
- Choose from our Loam Lever, Puget 1x or 2x drivetrain compatible levers, or Roadie/Drop Bar Lever Kit for road bars
- 1x Lever - Designed to be used with bikes using a single front chainring, this is a "shifter style" lever
- 2x lever - Designed to play nice with front shifters, this is a "vertical" lever that accommodates for the shifter on the left side of your handlebar
Product Specs:
- Choose any lever kit
- 30.9 & 31.6mm Diameters
- Weights: 125mm - 608g, 150mm - 613g, 170mm - 674g
- 2-bolt Micro Adjust Head
- Fixed External Routing at the Mid Cap for clean cable routing
- 3-year warranty!
$29.99
Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.
$184.99
The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm.
We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower.
Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length.
The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp.
FEATURES
- Travel adjust shims allow you to custom tune your post to dial in your perfect length.
- Cable actuated for easy installation and a simple no bleed remote
- Ergonomic remote paddle position
- Reliable sealed cartridge internals
- User replaceable cartridge only $60 USD
- Easy to service at home
- 2 year warranty
UPDATES
- Shortest total length of any dropper
- Shortest stack height of any dropper
- New upper DU Bushing in the upper collar
- Increased bushing overlap and durability
- 100-210mm post lengths in 10mm increments.
- 20g lighter
SPECS
- Drop 120mm, 150mm, 180mm, 210mm adjustable*.
- Diameter 30.9, 31.6, 34.9
- Routing Internal only
Remote Compatibility:
- SRAM Matchmaker X - SRAM MMX clamps
- Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100
- Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only
- 22.2mm Bar Clamp - All other groups 10 speed SHIMANO
- Cable clamping remote only (post requires cable stop to be assembled at base of post)
- Travel Reducing Shim Reduces travel by up to 20mm.
Weight Post Only
- (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g
- (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g
- (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g
Remote Only
- Remote with 22.2mm Bar Clamp - 46g
- Remote with SRAM Matchmaker X / I-spec-EV - 43g
- Remote with Shimano I-spec-EV - 43g
- Remote with Shimano I-spec II - 41g
- Housing and Cable (1300mm installed length) - 50g
$269.99
The lightest, longest, smoothest, and most reliable dropper post that will fit your bike.
The V3 is the lightest infinitely-adjustable dropper post on the market, it has the shortest total length and stack height of any dropper post, 20mm of adjustable travel, an extended 350-hour service interval, and new ultra-low friction IGUS® bushings and SKF® seals. Plus, save an additional 10g with our Titanium Bolt Upgrade Kit.
$18.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.
$149.00 - $150.00
$299.99
50% Off
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth.
Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper.
- Cable actuated with tool-free quick disconnect for easier installation and removal
- Low lever force provides consistent actuation pressure even with saddle weighted or unweighted
- Easy to modulate return speed with lever
- Remote lever sold separately
- 0mm offset
$180.00 - $279.00
$359.99
Up to 50% Off
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth.
"Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.
The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance.
- Cable actuated with tool-free quick disconnect for easier installation and removal
- Low lever force provides consistent actuation pressure even with saddle weighted or unweighted
- Easy to modulate return speed with lever
- Factory Series models feature Genuine Kashima Coat
- Remote lever sold separately
$28.00 - $34.99
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- 0mm offset
$31.99
Dimension Alloy seatpost.
- 1-piece forged AL-2014
- Clamp Style: Standard Rails
- Material: Aluminum
- Max Height: 245mm
- Min Height: 35mm
- Weight: 250g
$349.99
$350.00
On Sale
Our award-winning REVIVE is also available as an oversized version for 34.9mm seattubes. Not only the lower tube diameter increased to 34.9, but also the stanchion tube grew form 25mm to 28mm. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strenght and stiffness at the same time. This is unrivaled by the competition. Optimized wall thickness and materials keep the weight extremely low and so our REVIVE MAX weighs in lower than some "regular" sized posts of the competition.
Let´s see, what´s special about our REVIVE posts:
What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers?
Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike?
BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off.
Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth, …
And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before.
To understand the benefits over other posts you have to know about the problems of many current designs first: Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced.
That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of.
The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”.
Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down.
And here is where the patented RESET VALVE comes into play:
- Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand.
- This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike.
So, now one might already understand that:
- No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings.
- No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design
- The hydraulic system can be reset to “new” via the unique “REVIVE-valving”
- This means the hydraulic circuit is a very stable closed system and basically maintenance free.
Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability:
- Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play.
- Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes.
1 set REVIVE dropper post includes:
- 1x REVIVE Seatpost
- 1x cable housing 1500mm
- 1x inner wire 1700mm
- 2x housing endcap
- 1x barrel cable clamp
- 1x air valve adapter
- 1x Quick-Reset-Lever
- 1x remote (optional)
- 1x BikeYoke I-spec adapter or Splits Clamp (optional)
- 1 set titanium saddle bolts and nuts (optional)
Page 1 of 1