29-Inch

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The legendary High Roller returns with an all-new hybrid tread design, but the same old winning ways! Developed with extensive input and testing from Maxxis' World Cup athletes, the third generation of the High Roller is built to take on mixed conditions at high speeds - The third gen High Roller slots into the Maxxis gravity range between the Assegai and the Shorty - Widely-spaced tread clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - Built to take on mixed conditions at high speeds - Center tread uses a mid-spike design similar to the Shorty but with a lower knob height - Knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces - Cornering traction is enhanced via large, well-supported side knobs for predictable handling - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - All Maxxis tires 2.40" and up are considered WT according to Maxxis whether or not they are labeled WT - 3C MaxxGrip: the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications - DD: Designed for Enduro racing and ebike use. Two layers of lightweight 120 TPI casing material are combined with a butyl sidewall insert to create a highly durable tire with more trail feedback than a Downhill casing tire - TR: Tubeless Ready means the ability to run lower pressures, improving traction, lowering rolling resistance, and less chance of flatting - Recommended installation: Front or rear - Tire Diameter: 29" - ISO Diameter: 622 / Mountain / 29er - Labeled Size: 29 x 2.4" - Casing: 60tpi - Max Pressure: 50psi - Bead: folding - Weight: 1,299g. (29 x 2.4")

With a tread design that deftly balances rolling speed with braking and cornering traction, it's hard to find fault with the Minion DHF. That's probably why it's one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there's a Minion DHF spec to meet your needs. The Minion DHF is available in trail, enduro, and downhill specs. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The XCO European Champion tire The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique, low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob find traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal TNT is no exception. Using the proprietary Graphene enhanced 4C compound, the Mezcal attains the holy grail of XC tires; grip, durability, and low weight. - Defined center-ridge tread for low rolling resistance

The Maxxis Aspen is one of our premier XC race tires. A low center tread height allows the Aspen to roll quickly but substantial – for XC – side knobs provide cornering traction.

The Maxxis Forekaster features a spiky, well-spaced tread pattern that is ideal for XC racing or light duty trail riding in loose or wet conditions during the spring and fall. Use as a front paired with an Aspen or Ikon rear for an “aggressive” XC setup.

The second generation of the legendary High Roller - Easily clears debris - Open tread design - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims An open and aggressive tread design gives the High Roller II excellent soil penetration and mud-clearing ability. A square profile provides a solid, consistent feel across the knobs. Modified knobs on the shoulder and center improve braking performance and traction on hard surfaces. An excellent choice for technical, loose terrain.

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

The world’s fastest riders are always hungry for more traction. So when Loïc Bruni, Finn Iles, and Chris Grice from the Gravity team reached out to us to develop a mountain bike tire to tame World Cup Downhill tracks, we cooked up something that will satisfy even the most aggressive appetites. We completely redesigned the Cannibal tread pattern, integrating our super-sticky GRIPTON T9 compound with a high-volume casing that brings superior control to any terrain. Staggered shoulder blocks maximize cornering stability, and large center braking blocks bite aggressively into the ground. Engineered to the design specifications of our riders, the Cannibal balances weight and durability with GRID Gravity casing for Enduro, Downhill, and Park riding. The Cannibal delivers the unbeatable combination of grip, confidence, and control to devour any track. - High-volume casing and staggered shoulder blocks for predictable high-speed cornering. - Re-designed center knobs and siping form strong surface connections. - Wide braking edges and massive center blocks cut in for maximum deceleration. - GRIPTON T9 compound reduces terrain-induced chatter, enhancing confidence at warp speeds. - Compliant and adaptable GRID GRAVITY 2-ply casing construction is ideal for Enduro, Park, and Downhill riding. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

Searching for the ultimate do-all plus tire? Meet the Ranger...bikepacking approved, trail ready. Weight-optimized to outperform in all environments and excel on longer rides—dry to wet, hardpack or loam, the Ranger isn’t intimidated. - Excellent do-all tire that excels in various conditions ranging from hardpack to wet trails - Multi-directional siping provides increased traction whether accelerating, braking, or cornering - Huge variety of size and rubber types to choose from

Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast-rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability, and cornering traction. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40, approximate weight 1400g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T7/T9.

This Hillbilly MTB tire likes it raw. Gravity-focused, excelling in steep, slippery, loose, and wet conditions in the continental north, the all-new Hillbilly is designed specifically to find traction in shifty natural terrain and bring confidence and control to the unpredictable wild. The new mountain bike tire tread pattern features an aggressive tread with deep center knobs and high-volume shoulder blocks to bite through loose soil when cornering. Block-in-block transition knobs reinforce the tire structure, aid traction, and lower rolling resistance, from plowing deep loam to railing rock slabs and charging over slippery roots. Specialized’s exclusive Sticky Fast T9 rubber compound elevates the Hillbilly’s traction, enabling it to stick everywhere, even in the greasiest conditions. In addition to its ability to grip in slippery situations, our T9 compound is formulated to bring just the right amount of damping to the backwoods party, reducing tire bounce and deflection to enhance stability and control in challenging conditions. This tubeless-ready trail tire is available in either GRID Trail or GRID Gravity casing, covering trail, all-mountain, enduro, and downhill. GRID Trail’s bead-to-bead protection and stability make it an excellent choice for aggressive riding in rough conditions. GRID Gravity is a burly, two-ply construction designed for durability and puncture protection in extreme conditions, offering incredible strength and exceptional tire stability when loaded hard into corners and compressed into jump faces. Just add sealant as the Hillbilly is a 2Bliss ready clincher for easy mounting and inflation with or without tubes. - Large block-in-block shoulder knobs for supported cornering. - Spike center knobs to dig in and find traction over loose terrain. - High-damping GRIPTON T9 compound reduces terrain-induced chatter, rebounds slowly, and has extreme grip in all conditions. - GRID Trail Casing: 60 TPI, tough MTB trail construction with additional bead-to-bead protection for exceptional puncture resistance, sidewall stiffness, and stability. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures. - GRID Trail 27.5x2.4; psi 25-50, approximate weight 985g. - GRID Trail 29x2.4; psi 25-50, approximate weight 1070g.

The Butcher 2Bliss Ready features a World-Cup proven aggressive tread design to bite and grip in any condition. Ramped and siped, the center tread blocks provide maximum traction and accurate steering. The sawtooth faced shoulder knobs offer a continuous biting edge for railing through corners. GRID casing provides a light and supple trail construction with additional sidewall protection for exceptional durability and sidewall stability. 29 x 2.6", psi 20-40, approximate weight 965g. GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. 29 x 2.6", psi 20-40, approximate weight 1050g GRID GRAVITY casing compliments gravity riding with an all-new 2-ply construction for maximum cornering stability and flat protection. 29x2.6", psi 20-40 approximate weight 1315g. The T7 GRIPTON® compound enhances rolling speed while still providing tons of grip. The high-damping T9 GRIPTON® compound rebounds slowly to grip and stick to the ground for total traction and control.

The Eliminator tire features a new generation of tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator perfect for enduro where versatility is key. The Eliminator still has the bite of a DH tire but also brings the manners to handle well on hardpacked trails. These characteristics also work well for trail e-bikes, too—combining the traction needed to stay in control on the trail with neutral handling on fire roads. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pleasures—all while increasing pinch flat protection by 15% and puncture protection by 30%. The GRID casing provides a light and supple trail construction with additional sidewall protection for exceptional durability and sidewall stability. The GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. 29 x 2.60: PSI 20-40, approximate weight: 930g The GRID GRAVITY casing compliments gravity riding with an all-new 2-ply construction for maximum cornering stability and flat protection. The T7 GRIPTON® compound enhances rolling speed while still providing tons of grip. The high-damping T9 GRIPTON® compound rebounds slowly to grip and stick to the ground for total traction and control.

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - T9 Balanced grip and rolling compound. - GRID Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Tubeless Ready.

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - Compound: T7 for balanced speed and rolling efficiency. - Tubeless Ready. - GRID Trail 27.5x2.4' T7, psi 25-50, approximate weight 915g. - GRID Trail 29x2.4' T7, psi 25-50, approximate weight 980g.

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside, and the center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. It's the perfect choice for your gravity excursions—one ride and you'll be hooked. Building on this solid base, the high-dampening T9 Gripton compound rebounds slowly to grip and stick to the ground for total traction and control. - Casing: 60tpi light yet tough with additional bead to bead protection for exceptional durability, sidewall stiffness, and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T9 - 29 x 2.3", psi 25-50, approximate weight 975g - 29 x 2.6", psi 20-40, approximate weight 1050g

The Eliminator GRID TRAIL 2Bliss Ready tire features a new generation of tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator perfect for enduro where versatility is key. The Eliminator still has the bite of a DH tire but also brings the manners to handle well on hardpacked trails. These characteristics also work well for trail e-bikes, too—combining the traction needed to stay in control on the trail with neutral handling on fire roads. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pleasures—all while increasing pinch flat protection by 15% and puncture protection by 30%. - Casing: Additional bead-to-bead protection for exceptional durability, plus sidewall stiffness stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.30: PSI 25-50, approximate weight: 890g - 29 x 2.60: PSI 20-40, approximate weight: 930g

The Eliminator GRID TRAIL 2Bliss Ready T9 tire features a tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator extremely predictable on soft to hardpack trails. It's perfect for enduro and E-bikes where versatility and confidence are key. Our GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures, all while increasing pinch flat protection by 15% and puncture protection by 30%. Building on this solid base, the high-dampening GRIPTON T9 compound rebounds slowly to grip and stick to the ground for total traction and control. - 29 x 2.3, psi 25-50, approximate weight 975g - 29 x 2.6, psi 20-40, approximate weight 1050g - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Casing: 60tpi tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability. - Compound: GRIPTON T9

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - The T7 GRIPTON® compound enhances rolling speed while still providing tons of grip. -The GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%.

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. The T7 GRIPTON® compound enhances rolling speed while still providing tons of grip. The high-damping T9 GRIPTON® compound rebounds slowly to grip and stick to the ground for total traction and control. The GRID casing provides a light and supple trail construction with additional sidewall protection for exceptional durability and sidewall stability. GRID 29x2.4' T9, psi 25-50, approximate weight 965g. The GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. GRID Trail 29x2.4' T7, psi 25-50, approximate weight 980g.

The S-Works Renegade 2Bliss Ready T5/T7 is perfect for fast accelerations, climbing in hard-pack terrain and podium finishes. Our fastest-rolling cross-country tread receives an elevated shoulder height to confidently carry speed through turns. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The S-Works casing is our lightest and most supple construction, shaving every gram possible from rotational weight. To top off this premium build, the T5/T7 dual compound uses T5 center knobs for minimal rolling resistance and T7 shoulder knobs for extra cornering grip. - Casing: 120 TPI, lightest and most supple XC race construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5/T7 - 29 x 2.35", PSI 25-50, approximate weight 590g

The Pathfinder is an incredible all-around tire that was originally created to meet the demands of the modern adventure rider. It has become so popular and well-received that we knew we had to offer it to riders of all ages. The Pathfinder youth is a versatile wire-bead tire with grippy cornering knobs for any conditions. Its fast-rolling slick center will make any sized rider the leader of the family peloton. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket

The Ground Control Control 2Bliss Ready T5 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5 - 29 x 2.2", PSI 25-50, approximate weight 800g - 29 x 2.35", PSI 25-50, approximate weight 845g